Set Default Page Add to Favorites Send This Page to FriendReadyPlanet.com
dot dot dot
dot
PRODUCTS
dot
bulletBall Valves
bulletButterfly Valves
bulletAmri BOAX-B Butterfly Valves
bulletCheck Valves
bulletPneumatic Actuator
bulletElectro Pneumatic Positioner
bulletNAMUR Solenoid Valves
bulletElectric Actuator
bulletGate Valves
bulletGlobe Valves
bulletAir Valves
bulletSluice Gate ( Penstock)
bulletFoot Valves
bulletFlap Valves
bulletY-Strainer
bulletSight Glass
bulletSafety Valves
bulletRubber Flexible Joint
bulletStainless Steel Expansion Joint
bulletPump
bulletFlange
bulletWater Hammer Arrestor
bulletAutomatic Recirculation Valve
dot
Valves Knowledge
dot
bulletBall Valves
bulletButterfly Valve
bulletAir Relief(Release) Valve
bulletValve Repair
bulletWater Hammer
bulletWater Hammer 2
bulletWaste Water
bulletIndustrial Wastewater Treatment
bulletSewage Treatment
bulletStainless Steel
dot
Handbook/Textbook/Magazine
dot
bulletEngineering Handbook Store
dot
Link
dot
bulletValve Center Blog




dot
Pneumatic Actuator

 
  

   

 Double Acting Actuator (DA) ISO 5211

Principle of Operation
Counter clockwise output operation is achieved by inserting pressure into Port 'A', to force the pistons apart thus rotating the actuator pinion counter clockwise.  During the operation, air from the outer chambers is exhausted through Port 'B'. Clockwise output operation is achieved by reverse of the above and inserting pressure into Port 'B

 

Single Acting Spring Return

Principle of Operation
Pressure applied to Port 'A', will cause the inner chamber to be pressurised, forcing the pistons outward to compress the springs.
The pinion is rotated counter counteil clockwise.  Upon release of pressure through port "A" the springs will exert pressure to close the pistons and rotate the pinion clockwise rapidly.
This action will often be use to close a 90° turn valve in shutdown mode.

 SPECIFICATIONS

Pressure range
     2 bar (29 psig) to 8 bar (116 psig) double acting
     3 bar (44 psig) to 8 bar (116 psig) spring return
     max.working pressure 10 bar (145 psig).

Media : filtered dry-or lubricated air.  For non corrosive gas water or light hydraulic oil please check with the technical department.

Temperature range : STD -20ºC (-4ºF) a + 80ºC (175ºF)
                                     +20ºC (+68ºF) a +150ºC (302ºF)
                  on request -50ºC(-58ºF) a +100ºC (21ºF).

Rotation : counterclockwise when Port 'A' is pressurized; clockwise when PORT'B' is pressurized and for spring return actuators.

Stroks : 90º with standard adjustment +3º or -3º.

Lubrication : all moving parts are factory lubricated for cycle life of the actuator.

Constructions : suitable for indoor and outdoor installation.

Connections : bottom drilling to match valve is in accordance with ISO 5211/DIN 3337 Interface for solenoid valve, shaft top end and top drilling to assemble accessories are in accordance with VDI/VDE 3845, NAMUR.

Inspection : each unit is hydraulically tested and certified and guaranteed for a minimum of 500.000 moves.

 

      Double Acting             Single Acting Spring Return

 with Pneumatic Positioner       with Disengageable Manual Overide

     with NAMUR micro switches which are contained in IP 65 waterproof box

     with NAMUR solenoid valve

Please Send Us Your Inquiry for More Detail and Price



Name
Telephone
E-Mail
Topic
Description
Authentication Code  *





Copyright © 2010 All Rights Reserved.